Description:
BrandBold Brilliance Concrete Acid Stain is a single component reactive stain that transforms an bland concrete slab into a unique floor that is just as attractive as a marble or glazed stone- at a fraction of the cost. Available in 14 colors, it will not chip, fade or peel.
BrandBold Brilliance Concrete Acid Stain may be applied to properly prepared and thoroughly cleaned concrete.
Benefits:
- Cost-effective & versatile
- Elegant & permanent
- LEED compliant
- Maintenance free
SURFACE PREP
If the concrete is in good condition, has never been treated (with integral or surface treatments such as a curing agent), is clean and free of any deleterious matter, and has cured to a uniform light color – free from all moisture and alkali spotting, no preliminary treatments are necessary. Do not acid etch surface whatsoever. If the stain does not take, the surface is still dirty, is sealed, or is too heavily matured to have reactive materials available for staining process, additional cleaning, stripping of the sealer, or sanding will be required.
- Available in 14 Brilliant & Vivid Colors
- No complex mixing required
- Ready to use
- Spray in circular motion
Coverage is dependent on the age, porosity, weather, and composition of the concrete. A definite coverage rate cannot be determined because every scenario is different. However, as a general rule, 200-400 square feet per gallon should be average yield. Final colors will vary from color chart; colors may appear different on computer screen than actual stain.
Downloads:
STEP 2 - BrandBold Brilliance Concrete ACID STAIN Technical Data Sheet